Magnetic Flow Meter

Magnetic Flow Meter measures flow velocity using the physical principle electromagnetic induction.

The complete lack of moving parts of this magnetic insertion flow-sensor is the source of its reliability. There is no rotor to stop turning in dirty water and there are no bearings to wear out. Brass, stainless, and PVC models withstand a variety of temperature, pressure, and chemical conditions. Reverse flow-output and submergibility are optional.

A rapidly reversing magnetic field is produced in the lower housing, and as the fluid moves through this field a voltage is generated. This tiny voltage is measured and translated into a frequency signal that is proportional to flow rate. This square wave signal can be sent directly to a PLC or other control or can be converted using any of the family of indicators and converters.

A modular system of electronics can be installed directly to the flow sensor or remotely mounted. The provides full indication of rate and total, plus Bar Graph. Options available are 4-20 mA , Hi/Lo Alarm, RS232, Batch Control, Data Logger, and Wireless Signal.

Brochure

Applications

Potable Water

Ag Water

Abrasives

Acids

Asphalts

Caustics

Chemicals

Concrete Pumping

Grout

Dredge Flows & Sand Pumping

Paper Pulp

Drilling Mud

Large Contaminates

Highly Viscous

Substances

Food Processing

Hazardous Wastes

Hydrocarbons

Particulated Liquids

Municipal Sludge’s &

Wastes

Oils

Product Processing

Plastics

Rendering Products

Reservoirs

Rivers and Streams

Runoffs

Sludge’s

Slurries & Tailings Dams

Suspended Solids

Tars

Most liquids containing suspended particles or air bubbles

…and More!