Non-metallic free-flushing sampling bottles activated by GO Devil Messenger (1000-MG) when individually or serially attached to hydrocable. Sequential closure by remote command with model 1015 or 1018 Rosette multibottle array.

Product Brochure

Key Features

Descriptions

Free-flushing sampling bottles activated by GO Devil messenger (1000-MG) when individually or serially attached to hydrocable. Sequential closure by remote command with model 1015 OR 1018 Rosette

Model 1010 Niskin Water Sampler, 1.2L

 

Model 1010 Niskin Water Sampler, 1.7L

 

Model 1010 Niskin Water Sampler, 2.5L

Model 1010 Niskin Water Sampler, 5L

Model 1010 Niskin Water Sampler, 5L

 

Model 1010 Niskin Water Sampler, 8LModel 1010 Niskin Water Sampler, 10L

Model 1010 Niskin Water Sampler, 10L

Model 1010 Niskin Water Sampler, 12L

Model 1010 Niskin Water Sampler, 20L

Model 1010 Niskin Water Sampler, 30L

Model 1010 Niskin Water Sampler, 30L

 

1010X – External spring Niskin bottle
1010H – Horizontal bottle (Niskin or external spring type) with center release block
1010V – Vertical wire mounting assembly for Niskin bottle
1010C – Convertible bottle with removable release plate for horizontal or vertical deployment
1010R – Niskin bottle with reversing thermometer mounting rack (thermometers no longer available) 1010PC – Niskin bottle with clear polycarbonate housing
1010-ROV – Niskin bottle with pull trigger for remote actuation by ROV

 

 

Sizes

Available in 1.2L, 1.7L, 2.5L, 5L, 8L, 10L, 12L, 20L and 30L capacities.

Materials

PVC housing, end stoppers, handles (on 5L-30L sizes), cable clamp blocks (aluminum on 20 and 30L). Delrin push rod, air vent screw and petcock. Stainless steel wire clamp bolts and wing nuts.
End stopper closure band of latex tubing. Buna-N O-ring seals. Nylon monofilament lanyards with brass snap hook. Maximum working temperature is 60°C (140°F).

End closure

Stopper with spherical section sealing surface held firmly against O-ring seal by internal latex tubing.

Drainage

Air vent thumbscrew at top, petcock near base (.173” orifice). 20L and 30L bottles equipped with second petcock (.375” orifice) for rapid drainage.

Mounting

All bottles will accept wire up to 1/4” (6.35mm).